-
Diagnostic Click Here to Book
$150
It's important to understand the difference between a simple "check engine light check" at a parts store and a comprehensive diagnostic performed by a qualified mechanic. Here's a breakdown of why a full diagnostic is far superior:
Check Engine Light Check (Parts Store):
Basic Code Reading:
Parts stores typically offer a free service where they connect a basic OBD-II (On-Board Diagnostics II) scanner to your vehicle.
This scanner retrieves Diagnostic Trouble Codes (DTCs) from your car's computer.
These codes provide a general indication of a potential problem area.
Limited Information:
The codes themselves don't tell the whole story. For example, a code might indicate a problem with an oxygen sensor, but it doesn't reveal whether the sensor is faulty, the wiring is damaged, or there's another underlying issue.
Parts store employees are generally not trained mechanics, so they can't provide in-depth analysis or troubleshooting.
Focus on Parts Sales:
The primary goal of a parts store is to sell parts. So, they might suggest replacing the part associated with the code, even if that's not the root cause of the problem.
Full Diagnostic (Mechanic):
Comprehensive Analysis:
A qualified mechanic uses advanced diagnostic equipment and their expertise to perform a thorough analysis of your vehicle's systems.
They don't just read codes; they interpret them in the context of your car's specific make, model, and condition.
They perform further tests, such as checking sensor readings, inspecting wiring, and evaluating engine performance.
Pinpointing the Root Cause:
A full diagnostic aims to identify the precise cause of the problem, not just the symptom.
This prevents unnecessary repairs and saves you money in the long run.
Expert Troubleshooting:
Mechanics have the knowledge and experience to troubleshoot complex automotive issues.
They can identify intermittent problems, hidden faults, and other issues that a simple code reader might miss.
Safety and Reliability:
A proper diagnostic can ensure that all of your cars systems are working as they should, increasing the safety and reliability of your vehicle.
In summary:
A parts store check provides a quick glimpse of potential problems, while a full diagnostic provides a detailed and accurate assessment.
A full diagnostic is an investment in your vehicle's long-term health and your safety.
-
Rear Differential Service Click Here to Book'
$125
Changing the rear differential oil at regular intervals, such as every 30,000 miles, is a crucial maintenance practice that significantly impacts your vehicle's longevity and performance. Here's a breakdown of the key reasons:
1. Lubrication and Wear Reduction:
The rear differential houses gears that transfer power from the driveshaft to the wheels. These gears operate under high stress and friction.
Differential oil provides essential lubrication, minimizing wear and tear on these critical components.
Over time, the oil breaks down, losing its lubricating properties, which can lead to increased friction, heat, and premature wear.
2. Contamination Removal:
As the differential operates, metal shavings and other contaminants accumulate in the oil.
These contaminants can act as abrasives, further accelerating wear on the gears and bearings.
A fluid change removes these contaminants, ensuring optimal lubrication and protecting the differential from damage.
3. Heat Dissipation:
The differential generates heat during operation.
Differential oil helps to dissipate this heat, preventing overheating and potential damage to the components.
Degraded oil loses its ability to effectively dissipate heat, increasing the risk of overheating.
4. Preventing Component Failure:
Neglecting differential fluid changes can lead to severe damage to the differential, including gear failure and bearing damage.
These repairs can be costly and time-consuming.
Regular fluid changes are a preventative measure that can save you significant expenses in the long run.
5. Maintaining Optimal Performance:
Properly lubricated differentials operate more efficiently, contributing to smoother and more reliable vehicle performance.
This is especially important for vehicles that tow heavy loads, engage in off-road driving, or operate under severe conditions.
Factors that can influence the frequency of rear differential fluid changes:
Driving Conditions:
Vehicles that are frequently used for towing, off-roading, or heavy hauling require more frequent fluid changes.
Driving in extreme temperatures or dusty conditions can also accelerate oil degradation.
Vehicle Type:
Trucks and SUVs, which often operate under heavier loads, may require more frequent fluid changes than passenger cars
-
Rear Differential Service Click Here to Book
$125*For most vehicles
Changing the rear differential oil at regular intervals, such as every 30,000 miles, is a crucial maintenance practice that significantly impacts your vehicle's longevity and performance. Here's a breakdown of the key reasons:
1. Lubrication and Wear Reduction:
The rear differential houses gears that transfer power from the driveshaft to the wheels. These gears operate under high stress and friction.
Differential oil provides essential lubrication, minimizing wear and tear on these critical components.
Over time, the oil breaks down, losing its lubricating properties, which can lead to increased friction, heat, and premature wear.
2. Contamination Removal:
As the differential operates, metal shavings and other contaminants accumulate in the oil.
These contaminants can act as abrasives, further accelerating wear on the gears and bearings.
A fluid change removes these contaminants, ensuring optimal lubrication and protecting the differential from damage.
3. Heat Dissipation:
The differential generates heat during operation.
Differential oil helps to dissipate this heat, preventing overheating and potential damage to the components.
Degraded oil loses its ability to effectively dissipate heat, increasing the risk of overheating.
4. Preventing Component Failure:
Neglecting differential fluid changes can lead to severe damage to the differential, including gear failure and bearing damage.
These repairs can be costly and time-consuming.
Regular fluid changes are a preventative measure that can save you significant expenses in the long run.
5. Maintaining Optimal Performance:
Properly lubricated differentials operate more efficiently, contributing to smoother and more reliable vehicle performance.
This is especially important for vehicles that tow heavy loads, engage in off-road driving, or operate under severe conditions.
Factors that can influence the frequency of rear differential fluid changes:
Driving Conditions:
Vehicles that are frequently used for towing, off-roading, or heavy hauling require more frequent fluid changes.
Driving in extreme temperatures or dusty conditions can also accelerate oil degradation.
Vehicle Type:
Trucks and SUVs, which often operate under heavier loads, may require more frequent fluid changes than passenger cars
-
Coolant flush Click Here to Book
$125 *For most vehicles
Maintaining your vehicle's cooling system is essential for preventing costly engine damage, and a coolant flush is a key part of that maintenance. Here's why it's important to perform a coolant flush every 60,000 miles or every 10 years, whichever comes first:
1. Prevents Corrosion and Rust:
Coolant contains additives that protect the metal components of your cooling system from corrosion and rust.
Over time, these additives break down, leaving your system vulnerable to damage.
Rust and corrosion can lead to leaks, blockages, and premature failure of components like the radiator, water pump, and hoses.
2. Removes Contaminants:
As coolant circulates, it collects contaminants such as mineral deposits, scale, and debris.
These contaminants can build up and restrict coolant flow, reducing the cooling system's efficiency.
A coolant flush removes these contaminants, ensuring proper circulation and heat transfer.
3. Prevents Overheating:
A clean and properly functioning cooling system is essential for preventing engine overheating.
Overheating can cause severe engine damage, including warped cylinder heads and blown gaskets.
By maintaining your coolant, you help to ensure that your engine stays at its optimal operating temperature.
4. Lubricates the Water Pump:
Coolant also lubricates the water pump, which is responsible for circulating coolant throughout the engine.
Old coolant can lose its lubricating properties, leading to premature wear and failure of the water pump.
A coolant flush replenishes the lubricating additives, extending the life of your water pump.
5. Maintains Coolant Effectiveness:
Coolant's ability to prevent freezing and boiling diminishes over time.
A coolant flush replaces old, ineffective coolant with fresh fluid that provides optimal protection in all weather conditions.
In essence:
A coolant flush is a preventative maintenance measure that protects your engine from costly damage.
It helps to maintain the efficiency and reliability of your cooling system.
Following the recommended maintenance intervals will help to ensure the longevity of your vehicle.
-
Power Steering Fluid Flush Click Here to Book
$175 *For most vehicles
A power steering fluid flush, typically recommended around 30,000 miles, is a vital maintenance procedure that often gets overlooked. Here's why it's important to keep your power steering fluid fresh:
1. Prevents Wear and Tear on Components:
Power steering fluid lubricates the power steering pump, rack and pinion, and hoses.
Over time, the fluid degrades, losing its lubricating properties.
This can lead to increased friction and wear on these critical components, potentially causing premature failure.
A flush replaces the old, degraded fluid with fresh fluid, ensuring proper lubrication and extending the lifespan of your power steering system.
2. Removes Contaminants:
Just like other fluids in your vehicle, power steering fluid can accumulate contaminants such as metal shavings, dirt, and debris.
These contaminants can act as abrasives, causing damage to the delicate internal components of the power steering system.
A flush removes these contaminants, keeping your system clean and functioning smoothly.
3. Prevents Power Steering Pump Failure:
The power steering pump is a crucial component of the system, and its failure can result in loss of power steering assist.
Old, contaminated fluid can cause the pump to work harder, leading to overheating and premature failure.
A fluid flush helps to keep the pump running cool and efficiently.
4. Maintains Optimal Performance:
Fresh power steering fluid ensures smooth and responsive steering.
Old, degraded fluid can cause stiff or jerky steering, making it more difficult to control your vehicle.
A flush restores the fluid's optimal viscosity and lubricating properties, improving steering feel and responsiveness.
5. Prevents Leaks and Damage:
Old fluid can become acidic, which can damage seals and hoses within the power steering system.
This can lead to leaks, which can further damage the system and create safety hazards.
A fluid flush helps to prevent these leaks and protect the system from damage.
Why 30,000 Miles?
30,000 miles is a general guideline, and the actual interval may vary depending on your vehicle's make, model, and driving conditions.
Heavy-duty driving, such as towing or frequent stop-and-go traffic, can accelerate fluid degradation.
Always refer to your vehicle's owner's manual for specific recommendations.
In essence, a power steering fluid flush is a relatively inexpensive maintenance procedure that can save you from costly repairs and ensure smooth, safe steering.
-
Disinfect HVAC System Click Here to Book
$100*For most vehicles
Disinfecting the HVAC system and replacing the cabin air filter every six months might seem frequent, but it's a practice that offers significant benefits for your health and the overall cleanliness of your vehicle's interior. Here's a breakdown of the reasons:
1. Improved Air Quality and Respiratory Health:
Cabin Air Filter:
The cabin air filter traps dust, pollen, mold spores, and other airborne particles that enter your car's ventilation system.
Over time, the filter becomes clogged, reducing its effectiveness and allowing these contaminants to circulate in the cabin.
Regular replacement ensures that you're breathing cleaner air, which is especially important for people with allergies, asthma, or other respiratory conditions.
HVAC Disinfection:
The humid environment inside the HVAC system can become a breeding ground for bacteria, mold, and mildew.
These microorganisms can release unpleasant odors and potentially harmful spores into the cabin.
Disinfecting the system eliminates these microorganisms, improving air quality and reducing the risk of respiratory problems.
2. Odor Elimination:
Bacteria and mold growth in the HVAC system can produce musty or unpleasant odors.
Disinfecting the system eliminates these odors, leaving your car smelling fresh and clean.
Replacing a dirty cabin air filter also removes trapped odors.
3. Enhanced System Efficiency:
A clogged cabin air filter restricts airflow, forcing the HVAC system to work harder to maintain the desired temperature.
This can reduce the system's efficiency and increase fuel consumption.
Replacing the filter ensures optimal airflow and system performance.
Disinfecting the system allows for unrestricted airflow through the ducting.
4. Prevents Allergic Reactions and Irritations:
Regularly cleaning the HVAC system and replacing the cabin air filter can significantly reduce the presence of allergens and irritants in your car.
This can help to prevent allergic reactions, such as sneezing, coughing, and itchy eyes.
Why Every Six Months?
Six months is a good general guideline, especially for those who live in areas with high pollen counts, dusty conditions, or humid climates.
If you frequently drive in heavy traffic or on unpaved roads, you may need to replace the filter and disinfect the system more often.
Seasonal changes are also a great reminder to perform this service.
A good time to remember to perform this service is in the spring, and in the fall.
-
Fuel Injector and Intake Port Cleaning Click Here to Book
$150*For most vehicles
While DIY fuel injector cleaners from a parts store can offer some benefits, a professional fuel injector cleaning performed at a shop provides a much more thorough and effective solution. Here's a breakdown of the key differences:
DIY Fuel Injector Cleaners (Parts Store):
Simple Additive:
These cleaners are typically added to your fuel tank.
They work by dissolving some deposits as the fuel-cleaner mixture passes through the fuel system.
Limited Cleaning Power:
These cleaners are generally less concentrated and less effective at removing heavy carbon deposits.
They primarily target deposits in the fuel lines and injectors, but may not effectively clean the injector tips where the most stubborn buildup occurs.
Variable Effectiveness:
The effectiveness of DIY cleaners can vary depending on the severity of the buildup and the quality of the product.
They may provide a noticeable improvement in some cases, but may have little to no effect in others.
Indirect Cleaning:
These cleaners are indirect, and the cleaning solution is diluted by the fuel in the tank.
Professional Fuel Injector Cleaning (Shop):
Direct Cleaning:
Shops use specialized equipment to directly clean the fuel injectors.
They often remove the injectors from the engine and connect them to a cleaning machine.
This allows for a highly concentrated cleaning solution to be forced through the injectors, effectively removing even stubborn deposits.
Comprehensive Cleaning:
Professional cleaning targets all areas of the fuel injectors, including the injector tips, where buildup is most critical.
They can also clean other components of the fuel system, such as the fuel rails.
Advanced Equipment and Techniques:
Shops use ultrasonic cleaning machines and other advanced equipment to ensure thorough cleaning.
They may also perform flow testing to ensure that the injectors are functioning properly after cleaning.
Expert Diagnosis:
Mechanics can diagnose fuel injector problems and determine if cleaning is necessary.
They can also identify other potential issues that may be affecting engine performance.
More lasting results:
Because of the nature of the cleaning, and the quality of the chemicals used, the results from a professional cleaning will last much longer than a DIY method.
-
Transmission Fluid and Filter Service Click Here to Book
$475
Maintaining your transmission is crucial for the longevity and smooth operation of your vehicle. A transmission flush and filter change, typically recommended around 60,000 miles, is a key part of this maintenance. Here's why it's so important:
1. Fluid Degradation and Contamination:
Fluid Breakdown: Transmission fluid, like any other fluid, degrades over time due to heat, friction, and oxidation. It loses its lubricating and protective properties.
Contamination: As the transmission operates, metal shavings from gears and clutch material accumulate in the fluid. This contaminated fluid can cause excessive wear and damage to internal components.
A flush gets rid of the old degraded fluid, and the contaminates within it.
2. Filter Clogging:
The transmission filter is designed to trap these contaminants. Over time, it can become clogged, restricting fluid flow.
Restricted fluid flow can lead to reduced lubrication, increased heat, and potential transmission failure.
Replacing the filter ensures proper fluid flow and protects the transmission from damage.
3. Preventing Slipping and Rough Shifting:
Clean, fresh transmission fluid ensures smooth and precise gear changes.
Degraded or contaminated fluid can cause slipping, rough shifting, and other transmission problems.
A flush and filter change can restore smooth shifting and prevent these issues.
4. Extending Transmission Life:
Regular maintenance, including transmission flushes and filter changes, can significantly extend the life of your transmission.
This can save you from costly repairs or even a complete transmission replacement.
5. Maintaining Optimal Performance:
A well-maintained transmission operates more efficiently, contributing to smoother and more reliable vehicle performance.
This is especially important for vehicles that tow heavy loads, engage in frequent stop-and-go traffic, or operate under severe conditions.
Why 60,000 Miles?
60,000 miles is a general guideline, and the actual interval may vary depending on your vehicle's make, model, and driving conditions.
Heavy-duty driving, such as towing or frequent stop-and-go traffic, can accelerate fluid degradation.
Always refer to your vehicle's owner's manual for specific recommendations.
Some vehicles require this service more often, and some less often.
Important Considerations:
Flush vs. Drain and Fill: A transmission flush replaces nearly all of the old fluid, while a drain and fill only replaces a portion. A flush is generally recommended for optimal cleaning.
-
Power Steering Fluid Flush Click Here to Book'
$125
A power steering fluid flush, typically recommended around 30,000 miles, is a vital maintenance procedure that often gets overlooked. Here's why it's important to keep your power steering fluid fresh:
1. Prevents Wear and Tear on Components:
Power steering fluid lubricates the power steering pump, rack and pinion, and hoses.
Over time, the fluid degrades, losing its lubricating properties.
This can lead to increased friction and wear on these critical components, potentially causing premature failure.
A flush replaces the old, degraded fluid with fresh fluid, ensuring proper lubrication and extending the lifespan of your power steering system.
2. Removes Contaminants:
Just like other fluids in your vehicle, power steering fluid can accumulate contaminants such as metal shavings, dirt, and debris.
These contaminants can act as abrasives, causing damage to the delicate internal components of the power steering system.
A flush removes these contaminants, keeping your system clean and functioning smoothly.
3. Prevents Power Steering Pump Failure:
The power steering pump is a crucial component of the system, and its failure can result in loss of power steering assist.
Old, contaminated fluid can cause the pump to work harder, leading to overheating and premature failure.
A fluid flush helps to keep the pump running cool and efficiently.
4. Maintains Optimal Performance:
Fresh power steering fluid ensures smooth and responsive steering.
Old, degraded fluid can cause stiff or jerky steering, making it more difficult to control your vehicle.
A flush restores the fluid's optimal viscosity and lubricating properties, improving steering feel and responsiveness.
5. Prevents Leaks and Damage:
Old fluid can become acidic, which can damage seals and hoses within the power steering system.
This can lead to leaks, which can further damage the system and create safety hazards.
A fluid flush helps to prevent these leaks and protect the system from damage.
Why 30,000 Miles?
30,000 miles is a general guideline, and the actual interval may vary depending on your vehicle's make, model, and driving conditions.
Heavy-duty driving, such as towing or frequent stop-and-go traffic, can accelerate fluid degradation.
Always refer to your vehicle's owner's manual for specific recommendations.
In essence, a power steering fluid flush is a relatively inexpensive maintenance procedure that can save you from costly repairs and ensure smooth, safe steering.
-
4 Cylinder Tune Up Click Here to Book
$160 *For most vehicles
Replacing spark plugs and the air filter are key components of this process, and doing so around 90,000 miles is generally recommended, though this can vary. Here's why:
Spark Plug Replacement:
Efficient Combustion:
Spark plugs ignite the air-fuel mixture in the engine's cylinders, creating combustion.
Over time, spark plug electrodes wear down, and deposits build up, reducing their ability to produce a strong, consistent spark.
This leads to incomplete combustion, which results in reduced power, poor fuel economy, and increased emissions.
Preventing Misfires:
Worn or fouled spark plugs can cause misfires, where the air-fuel mixture fails to ignite.
Misfires can damage the catalytic converter and other engine components.
Replacing spark plugs prevents misfires and protects your engine.
Improved Performance:
New spark plugs restore optimal combustion, resulting in smoother acceleration, increased power, and better fuel efficiency.
Air Filter Replacement:
Clean Airflow:
The air filter prevents dust, dirt, and debris from entering the engine's intake system.
A clogged air filter restricts airflow, which reduces engine power and fuel efficiency.
A clean air filter ensures optimal airflow, allowing the engine to breathe properly.
Protecting Engine Components:
Dirty air can contain abrasive particles that can damage sensitive engine components, such as the cylinder walls and valves.
A clean air filter protects these components from wear and tear.
Improved Fuel Economy:
By allowing the engine to breathe easier, the engine does not have to work as hard, therefore improving fuel economy.
Why 90,000 Miles?
90,000 miles is a common recommendation for spark plug and air filter replacement, but the actual interval can vary depending on:
Vehicle Make and Model: Some vehicles use long-lasting spark plugs that can last 100,000 miles or more.
Driving Conditions: Heavy-duty driving, such as towing or frequent stop-and-go traffic, can accelerate wear and tear.
Modern vehicles have improved spark plug life
Beyond Spark Plugs and Air Filters:
While spark plugs and air filters are essential components of a tune-up, other maintenance items may also be included, such as:
Inspecting and replacing ignition wires (if applicable)
Checking and adjusting ignition timing (if applicable)
Inspecting and cleaning the throttle body
-
6/8 Cylinder Tune Up Click Here to Book
$385 *For most vehicles
Replacing spark plugs and the air filter are key components of this process, and doing so around 90,000 miles is generally recommended, though this can vary. Here's why:
Spark Plug Replacement:
Efficient Combustion:
Spark plugs ignite the air-fuel mixture in the engine's cylinders, creating combustion.
Over time, spark plug electrodes wear down, and deposits build up, reducing their ability to produce a strong, consistent spark.
This leads to incomplete combustion, which results in reduced power, poor fuel economy, and increased emissions.
Preventing Misfires:
Worn or fouled spark plugs can cause misfires, where the air-fuel mixture fails to ignite.
Misfires can damage the catalytic converter and other engine components.
Replacing spark plugs prevents misfires and protects your engine.
Improved Performance:
New spark plugs restore optimal combustion, resulting in smoother acceleration, increased power, and better fuel efficiency.
Air Filter Replacement:
Clean Airflow:
The air filter prevents dust, dirt, and debris from entering the engine's intake system.
A clogged air filter restricts airflow, which reduces engine power and fuel efficiency.
A clean air filter ensures optimal airflow, allowing the engine to breathe properly.
Protecting Engine Components:
Dirty air can contain abrasive particles that can damage sensitive engine components, such as the cylinder walls and valves.
A clean air filter protects these components from wear and tear.
Improved Fuel Economy:
By allowing the engine to breathe easier, the engine does not have to work as hard, therefore improving fuel economy.
Why 90,000 Miles?
90,000 miles is a common recommendation for spark plug and air filter replacement, but the actual interval can vary depending on:
Vehicle Make and Model: Some vehicles use long-lasting spark plugs that can last 100,000 miles or more.
Driving Conditions: Heavy-duty driving, such as towing or frequent stop-and-go traffic, can accelerate wear and tear.
Modern vehicles have improved spark plug life
Beyond Spark Plugs and Air Filters:
While spark plugs and air filters are essential components of a tune-up, other maintenance items may also be included, such as:
Inspecting and replacing ignition wires (if applicable)
Checking and adjusting ignition timing (if applicable)
Inspecting and cleaning the throttle body
-
Throttle Body Cleaning Click Here to Book
$50 *For most vehicles
A throttle body cleaning, typically recommended around 30,000 miles, is a maintenance procedure that can significantly improve your vehicle's performance and fuel efficiency. Here's a breakdown of the benefits:
1. Improved Airflow and Engine Performance:
Carbon Buildup: The throttle body is a critical component that controls the amount of air entering the engine. Over time, carbon deposits, dirt, and grime can accumulate on the throttle plate and bore.
Restricted Airflow: This buildup restricts airflow, disrupting the air-fuel mixture and leading to poor engine performance, including:
Rough idling
Hesitation during acceleration
Reduced power
Stalling
Cleaning Benefits: Cleaning the throttle body removes these deposits, restoring proper airflow and improving engine performance.
2. Enhanced Fuel Efficiency:
Accurate Air-Fuel Ratio: A clean throttle body ensures that the engine receives the correct amount of air, which is essential for proper combustion.
Optimized Fuel Consumption: When the air-fuel mixture is optimized, the engine burns fuel more efficiently, leading to improved fuel economy.
Sensor Accuracy: A dirty throttle body can also effect sensor readings, which in turn can effect fuel trims. Cleaning the throttle body helps keep sensor readings accurate.
3. Smoother Idle and Acceleration:
Consistent Airflow: A clean throttle body ensures consistent airflow, resulting in a smoother and more stable idle.
Responsive Acceleration: Removing carbon deposits allows the throttle plate to open and close smoothly, leading to more responsive acceleration.
4. Reduced Emissions:
Complete Combustion: A clean throttle body contributes to more complete combustion, which reduces harmful emissions.
Environmental Benefits: This helps to reduce your vehicle's environmental impact.
5. Preventing Potential Issues:
Early Detection: Regularly cleaning the throttle body can help to identify potential issues with other components, such as sensors or vacuum leaks.
Cost Savings: Preventing these issues can save you from costly repairs down the road.
Why 30,000 Miles?
30,000 miles is a general guideline, and the actual interval may vary depending on:
Driving Conditions: Heavy-duty driving, such as frequent stop-and-go traffic or driving in dusty conditions, can accelerate carbon buildup.
Fuel Quality: Lower quality fuels can contribute to more carbon buildup.
-
Rear Brake Pads and Rotors Click Here to Book
$650*For most vehicles
When we recommend replacing both brake pads and rotors simultaneously, it's about delivering a level of craftsmanship and quality of work that goes beyond simply fixing an immediate problem. It's about ensuring your vehicle's braking system operates at its absolute best, providing you with safety and peace of mind.
Here's a breakdown of why this approach is essential:
Ensuring Harmonious Operation:
New brake pads are designed to mate perfectly with a smooth, even rotor surface.
Installing them on worn rotors, which often have grooves, warps, or uneven wear, compromises this crucial fit.
By replacing both, we ensure that the pads and rotors work in perfect harmony, maximizing braking efficiency and responsiveness. This demonstrates meticulous craftsmanship by paying close attention to component synergy.
Maintaining Consistent Performance:
Uneven rotor surfaces can cause vibrations, noise, and inconsistent braking performance.
This not only affects your driving experience but also compromises safety.
By replacing both, we eliminate these issues, ensuring smooth, predictable, and reliable braking. This is a reflection of the high quality of work we strive for.
Preventing Premature Wear:
Worn rotors can accelerate the wear of new brake pads, reducing their lifespan and requiring premature replacement.
By replacing both, we ensure that both components wear evenly, maximizing their longevity and saving you money in the long run.
This is a part of our craftsmanship to ensure that the work we do lasts.
Upholding Safety Standards:
Your vehicle's braking system is a critical safety component.
By replacing both pads and rotors, we uphold the highest safety standards, ensuring that your vehicle has optimal stopping power.
This dedication to safety is the core of our quality of work.
Demonstrating Professional Integrity:
We believe in doing the job right the first time.
Replacing both pads and rotors is a testament to our professional integrity and our commitment to providing you with the highest quality of work.
It is a point of pride to show our craftsmanship.
In essence, replacing both brake pads and rotors is not just a recommendation; it's a reflection of our dedication to craftsmanship and our unwavering commitment to providing you with the highest quality of work.
-
4X4 Service Click Here to Book
$300*For most vehicles
Let's break down why changing the oil in your front and rear differentials, as well as the transfer case, is crucial every 30,000 miles, even if you rarely engage your 4-wheel drive, and why more frequent changes are needed with increased 4WD use.
Why 30,000 Miles for Infrequent 4WD Use:
Oil Degradation Over Time:
Even when not actively engaged, the gears and components within these systems are still partially submerged in oil.
Over time, this oil breaks down due to temperature fluctuations, oxidation, and the natural degradation of the additives within the oil.
This degradation reduces the oil's ability to lubricate and protect the gears, leading to increased wear.
Contamination Buildup:
Condensation can occur within the housings, introducing moisture that can lead to corrosion.
Seals can deteriorate, allowing contaminants like dust, dirt, and metal particles to enter the system.
Even without active 4WD use, these contaminants accumulate, compromising the oil's effectiveness.
Component Protection:
Regular oil changes ensure that these components are protected from premature wear and corrosion, even when the 4WD system is rarely used.
This preventative maintenance helps to maintain the integrity of the system and ensures it's ready when you need it.
Why More Frequent Changes for Frequent 4WD Use:
Increased Stress and Heat:
When you engage 4WD, the gears and components within the differentials and transfer case are subjected to significantly higher stress and heat.
This increased stress and heat accelerate the breakdown of the oil, reducing its lubricating properties more rapidly.
Increased Contamination:
Off-road driving and other heavy-duty 4WD use can expose the system to more contaminants, such as mud, water, and debris.
These contaminants can quickly degrade the oil and cause damage to the components.
Demanding Conditions:
Towing heavy loads, driving in extreme temperatures, or navigating challenging terrain places additional strain on the 4WD system.
Under these demanding conditions, more frequent oil changes are essential to maintain proper lubrication and prevent premature wear.
Extreme Conditions:
If you submerge your differentials or transfer case in water, it is extremely important to change the fluids as soon as possible.
-
Brake Fluid Flush Click Here to Book'
$175
Maintaining clean and fresh brake fluid is crucial for your vehicle's safety, and that's why we recommend a brake fluid flush with every brake service or every two years, whichever comes first. Here's why this is so important:
The Problem: Brake Fluid Absorbs Water
Brake fluid is hygroscopic, which means it readily absorbs moisture from the air. Even in sealed systems, minuscule amounts of water can seep in over time.
Think of it like a sponge: it will slowly soak up any water it comes into contact with.
Why Water in Brake Fluid is Dangerous:
Reduced Braking Power:
When you apply your brakes, friction generates heat. This heat is transferred to the brake fluid.
Water has a lower boiling point than brake fluid. If the water in the fluid gets hot enough, it will boil and turn into vapor.
Vapor is compressible, unlike liquid. This means that when you press the brake pedal, some of the force is used to compress the vapor instead of applying pressure to the brakes.
This results in a spongy brake pedal and reduced braking power, which can be extremely dangerous in emergency situations.
Internal Corrosion:
Water in the brake fluid can cause internal rusting of the brake system components, such as calipers, wheel cylinders, and brake lines.
This corrosion can lead to leaks, component failure, and costly repairs.
Rust can also cause blockages in the brake lines, further reducing braking effectiveness.
Compromised System Integrity:
A brake fluid flush removes the old, water-contaminated fluid and replaces it with fresh, clean fluid.
This helps maintain the integrity of the entire brake system, ensuring that it functions reliably when you need it most.
Why Every Brake Service or Two Years?
Regular Brake Services:
During a brake service, we inspect and service your brake system.
A fluid flush at this time ensures that the new brake components are working with fresh, clean fluid for optimal performance.
Two-Year Interval:
Even if you don't drive your vehicle frequently, brake fluid will still absorb moisture over time.
The two-year interval ensures that the fluid is replaced before it becomes too contaminated.
By adhering to this maintenance schedule, we help to ensure that your brake system is always in top condition, providing you with safe and reliable braking performance.
-
Front Brakes and Rotors Click Here to Book
$650
When we recommend replacing both brake pads and rotors simultaneously, it's about delivering a level of craftsmanship and quality of work that goes beyond simply fixing an immediate problem. It's about ensuring your vehicle's braking system operates at its absolute best, providing you with safety and peace of mind.
Here's a breakdown of why this approach is essential:
Ensuring Harmonious Operation:
New brake pads are designed to mate perfectly with a smooth, even rotor surface.
Installing them on worn rotors, which often have grooves, warps, or uneven wear, compromises this crucial fit.
By replacing both, we ensure that the pads and rotors work in perfect harmony, maximizing braking efficiency and responsiveness. This demonstrates meticulous craftsmanship by paying close attention to component synergy.
Maintaining Consistent Performance:
Uneven rotor surfaces can cause vibrations, noise, and inconsistent braking performance.
This not only affects your driving experience but also compromises safety.
By replacing both, we eliminate these issues, ensuring smooth, predictable, and reliable braking. This is a reflection of the high quality of work we strive for.
Preventing Premature Wear:
Worn rotors can accelerate the wear of new brake pads, reducing their lifespan and requiring premature replacement.
By replacing both, we ensure that both components wear evenly, maximizing their longevity and saving you money in the long run.
This is a part of our craftsmanship to ensure that the work we do lasts.
Upholding Safety Standards:
Your vehicle's braking system is a critical safety component.
By replacing both pads and rotors, we uphold the highest safety standards, ensuring that your vehicle has optimal stopping power.
This dedication to safety is the core of our quality of work.
Demonstrating Professional Integrity:
We believe in doing the job right the first time.
Replacing both pads and rotors is a testament to our professional integrity and our commitment to providing you with the highest quality of work.
It is a point of pride to show our craftsmanship.
In essence, replacing both brake pads and rotors is not just a recommendation; it's a reflection of our dedication to craftsmanship and our unwavering commitment to providing you with the highest quality of work.
-
30k Mile Service Click Here to Book
$599.99 *For most vehicles
Maximize Savings & Performance: Our $599.99 30k Service Bundle (Save $270!)
Maintaining your vehicle's peak performance shouldn't break the bank. That's why we offer our comprehensive 30,000-mile service bundle for just $599.99 *for most vehicles, a package that saves you a significant $270 compared to performing these services individually. This service is recommended every 30,000, 130,000, and 230,000 miles, and so on, to keep your car running smoothly and efficiently.
Why This Bundle is a Smart Investment:
Comprehensive Care: This package addresses several key maintenance areas, ensuring your vehicle's essential systems are in top condition.
Significant Cost Savings: By bundling these services, you save $270 compared to paying for them separately. This is a budget-friendly way to maintain your vehicle's health.
Preventative Maintenance: Regular maintenance prevents costly repairs down the road. This 30,000-mile service helps identify and address potential problems before they escalate.
Improved Performance and Efficiency: Each service in this bundle contributes to improved engine performance, fuel efficiency, and overall driving experience.
What's Included in the $599.99 Bundle:
Brake Fluid Flush:
Removes moisture-contaminated brake fluid, preventing reduced braking power and internal corrosion.
Ensures consistent and reliable braking performance.
Fuel Injector Service:
Cleans fuel injectors, restoring proper fuel atomization and improving engine performance and fuel efficiency.
Reduces rough idling and hesitation.
Throttle Body Cleaning:
Removes carbon buildup, restoring proper airflow and improving engine performance and fuel efficiency.
Smooths out idle and acceleration.
Oil and Filter Change*Add 25$ for synthetic oil:
Replaces old, degraded oil with fresh oil and a new filter, ensuring proper engine lubrication and protection.
Extends engine life.
Cabin Air Filter Replacement:
Removes dust, pollen, and other contaminants, improving air quality inside the vehicle.
Helps those with allergies.
Engine Air Filter Replacement:
Ensures optimal airflow to the engine, improving performance and fuel efficiency.
Protects engine components.
Rear Differential Service (or 4x4 Service if applicable add 100$):
Replaces old, contaminated differential oil, protecting gears and bearings from wear and tear.
Ensures proper 4WD system operation.
-
60k Service Click Here to Book
$899.99 *For most vehicles
Double Down on Durability: Our $899.99 60k Service Bundle (Save $350!)
Building on the foundation of our popular 30,000-mile service, our 60,000-mile service bundle takes your vehicle's maintenance to the next level. Priced at $899.99 *for most vehicles, this comprehensive package saves you a significant $350 compared to individual services, ensuring your vehicle continues to perform at its best.
Just like our 30,000-mile service (recommended every 30,000, 130,000, and 230,000 miles, and so on) our 60,000 mile service is recommended at 60k, 160k, and 260k miles and so on.
Why the 60k Bundle is Essential:
Expanded Comprehensive Care: You get all the benefits of our 30,000-mile service, plus critical transmission maintenance.
Enhanced Cost Savings: Enjoy even greater savings of $350, a smart investment in your vehicle's longevity.
Proactive Maintenance: Continue to prevent costly future repairs by addressing potential issues early.
Optimized Performance: Maintain peak performance, fuel efficiency, and a smooth driving experience.
What's Included in the $899.99 Bundle:
Everything from the 30,000-mile service:
Brake Fluid Flush
Fuel Injector Service
Throttle Body Cleaning
Oil and Filter Change (*Add 25 for synthetic oil∗)∗Cabin Air Filter Replacement∗ Engine Air Filter Replacement∗ Rear Differential Service( or 4x4 Service if applicable add $100)
Plus, this critical addition:
Transmission Fluid and Filter Change:
Removes old, contaminated transmission fluid and replaces the filter, ensuring smooth shifting and preventing transmission damage.
Extends the life of your transmission, a vital component of your vehicle.
This 60,000-mile service bundle is designed to keep your vehicle running reliably and efficiently for years to come. It’s the next step in ensuring your vehicle's long-term health and performance.
-
90k Service Click Here to Book
$899.99 *For most vehicles
Ignite Performance at 90K: Our $899.99 Service Bundle (Save $255!)
Continuing our commitment to keeping your vehicle running at its peak, we're proud to offer our comprehensive 90,000-mile service bundle for just $899.99 *for most vehicles. This package builds on the foundation of our popular 30,000-mile service, adding critical spark plug replacement and saving you a substantial $255 compared to individual service costs. This service is recommended every 90,000, 190,000, and 290,000 miles, and so on.
Why the 90k Bundle is Crucial:
Expanded Maintenance: You get all the essential services from our 30,000-mile package, plus vital spark plug replacement for optimal engine performance.
Significant Savings: Enjoy $255 in savings, making this a smart and cost-effective maintenance choice.
Continued Preventative Care: Proactively address potential issues and prevent costly repairs down the line.
Restored Engine Power: Maintain peak engine performance, fuel efficiency, and a smooth driving experience.
What's Included in the $899.99 Bundle:
Everything from the 30,000-mile service:
Brake Fluid Flush
Fuel Injector Service
Throttle Body Cleaning
Oil and Filter Change (*Add $25 for synthetic oil∗) ∗Cabin Air Filter Replacement∗ Engine Air Filter Replacement∗ Rear Differential Service(or 4x4 Service if applicable add $100)
Plus, this essential addition:
Spark Plug Replacement:
Replaces worn spark plugs, ensuring proper ignition and preventing misfires.
Restores engine power, improves fuel efficiency, and reduces emissions.
Promotes smoother engine operation.
This 90,000-mile service bundle is designed to keep your vehicle running smoothly and efficiently, ensuring reliable performance for miles to come
-
Pre-paid Oil Change Program Click Here to Book
$300-375
Our Major Interval Services
$599.99
Maximize Savings & Performance: Our $599.99 30k Service Bundle (Save $270!)
Maintaining your vehicle's peak performance shouldn't break the bank. That's why we offer our comprehensive 30,000-mile service bundle for just $599.99 *for most vehicles, a package that saves you a significant $270 compared to performing these services individually. This service is recommended every 30,000, 130,000, and 230,000 miles, and so on, to keep your car running smoothly and efficiently.
Why This Bundle is a Smart Investment:
Comprehensive Care: This package addresses several key maintenance areas, ensuring your vehicle's essential systems are in top condition.
Significant Cost Savings: By bundling these services, you save $270 compared to paying for them separately. This is a budget-friendly way to maintain your vehicle's health.
Preventative Maintenance: Regular maintenance prevents costly repairs down the road. This 30,000-mile service helps identify and address potential problems before they escalate.
Improved Performance and Efficiency: Each service in this bundle contributes to improved engine performance, fuel efficiency, and overall driving experience.
What's Included in the $599.99 Bundle:
Brake Fluid Flush:
Removes moisture-contaminated brake fluid, preventing reduced braking power and internal corrosion.
Ensures consistent and reliable braking performance.
Fuel Injector Service:
Cleans fuel injectors, restoring proper fuel atomization and improving engine performance and fuel efficiency.
Reduces rough idling and hesitation.
Throttle Body Cleaning:
Removes carbon buildup, restoring proper airflow and improving engine performance and fuel efficiency.
Smooths out idle and acceleration.
Oil and Filter Change*Add 25$ for synthetic oil:
Replaces old, degraded oil with fresh oil and a new filter, ensuring proper engine lubrication and protection.
Extends engine life.
Cabin Air Filter Replacement:
Removes dust, pollen, and other contaminants, improving air quality inside the vehicle.
Helps those with allergies.
Engine Air Filter Replacement:
Ensures optimal airflow to the engine, improving performance and fuel efficiency.
Protects engine components.
Rear Differential Service (or 4x4 Service if applicable add 100$):
Replaces old, contaminated differential oil, protecting gears and bearings from wear and tear.
Ensures proper 4WD system operation.
$899.99
Double Down on Durability: Our $899.99 60k Service Bundle (Save $350!)
Building on the foundation of our popular 30,000-mile service, our 60,000-mile service bundle takes your vehicle's maintenance to the next level. Priced at $899.99 *for most vehicles, this comprehensive package saves you a significant $350 compared to individual services, ensuring your vehicle continues to perform at its best.
Just like our 30,000-mile service (recommended every 30,000, 130,000, and 230,000 miles, and so on) our 60,000 mile service is recommended at 60k, 160k, and 260k miles and so on.
Why the 60k Bundle is Essential:
Expanded Comprehensive Care: You get all the benefits of our 30,000-mile service, plus critical transmission maintenance.
Enhanced Cost Savings: Enjoy even greater savings of $350, a smart investment in your vehicle's longevity.
Proactive Maintenance: Continue to prevent costly future repairs by addressing potential issues early.
Optimized Performance: Maintain peak performance, fuel efficiency, and a smooth driving experience.
What's Included in the $899.99 Bundle:
Everything from the 30,000-mile service:
Brake Fluid Flush
Fuel Injector Service
Throttle Body Cleaning
Oil and Filter Change (*Add 25 for synthetic oil∗)∗Cabin Air Filter Replacement∗ Engine Air Filter Replacement∗ Rear Differential Service( or 4x4 Service if applicable add $100)
Plus, this critical addition:
Transmission Fluid and Filter Change:
Removes old, contaminated transmission fluid and replaces the filter, ensuring smooth shifting and preventing transmission damage.
Extends the life of your transmission, a vital component of your vehicle.
This 60,000-mile service bundle is designed to keep your vehicle running reliably and efficiently for years to come. It’s the next step in ensuring your vehicle's long-term health and performance.
$899.99
Ignite Performance at 90K: Our $899.99 Service Bundle (Save $255!)
Continuing our commitment to keeping your vehicle running at its peak, we're proud to offer our comprehensive 90,000-mile service bundle for just $899.99 *for most vehicles. This package builds on the foundation of our popular 30,000-mile service, adding critical spark plug replacement and saving you a substantial $255 compared to individual service costs. This service is recommended every 90,000, 190,000, and 290,000 miles, and so on.
Why the 90k Bundle is Crucial:
Expanded Maintenance: You get all the essential services from our 30,000-mile package, plus vital spark plug replacement for optimal engine performance.
Significant Savings: Enjoy $255 in savings, making this a smart and cost-effective maintenance choice.
Continued Preventative Care: Proactively address potential issues and prevent costly repairs down the line.
Restored Engine Power: Maintain peak engine performance, fuel efficiency, and a smooth driving experience.
What's Included in the $899.99 Bundle:
Everything from the 30,000-mile service:
Brake Fluid Flush
Fuel Injector Service
Throttle Body Cleaning
Oil and Filter Change (*Add $25 for synthetic oil∗) ∗Cabin Air Filter Replacement∗ Engine Air Filter Replacement∗ Rear Differential Service(or 4x4 Service if applicable add $100)
Plus, this essential addition:
Spark Plug Replacement:
Replaces worn spark plugs, ensuring proper ignition and preventing misfires.
Restores engine power, improves fuel efficiency, and reduces emissions.
Promotes smoother engine operation.
This 90,000-mile service bundle is designed to keep your vehicle running smoothly and efficiently, ensuring reliable performance for miles to come.
About Us
Driving Equality Forward
In these uncertain times, when basic rights are challenged and infringed upon, we believe in the power of community and the fundamental right to safety and respect. That's why we've created a haven for automotive service and repair, a place where everyone is truly equal, regardless of gender, sexual orientation, race, or creed.
We are proudly LGBTQ+ friendly and wholeheartedly embrace diversity in all its forms. We understand that the automotive industry has a history of judgment and exploitation, and we are determined to change that narrative. Our mission is to provide a safe, welcoming, and transparent environment where you can trust that your vehicle will be serviced with integrity and expertise.
We believe in building a space where everyone feels valued and respected. Whether you are a member of the LGBTQ+ community, a person of color, or an ally standing with us, we invite you to join us in our dream. Together, we can create a place where everyone can access quality auto service without fear of judgment or discrimination.
We are committed to:
Equality: Treating every customer with the same level of respect and fairness.
Transparency: Providing clear and honest communication about your vehicle's needs.
Integrity: Delivering high-quality service and repairs you can trust.
Community: Building a supportive and inclusive environment for all.
We are more than just an auto repair shop; we are a community dedicated to driving equality forward. Join us, and let's create a safer, more inclusive road for everyone.
Follow us on social
Contact Us
We're here to help keep your vehicle running smoothly and safely. Whether you have a question, need to schedule an appointment, or want to learn more about our services, we're ready to assist you.
Get in Touch:
Phone: Call or Text (360) 333-5373
Email: tcook@equality-auto.com
Don’t forget yo include your year, make, model, miles and the vin or license plate for you car
We're Happy to Provide Custom Quotes!
While our website lists many of our common services and repairs, we understand that every vehicle is unique. If you require a service or repair that isn't listed, please don't hesitate to contact us. We are happy to provide a personalized quote for any automotive need. Just give us a call or send us an email, and we'll work with you to get your vehicle back on the road.